Anybody who has spent time early in the morning watering the yard before a scorching hot day threatens to kill off every last shrub and flower has probably wished there was an easier way of managing the process. Well the good news is that a sprinkler system installation is well within the realms of a competent DIY enthusiast with some basic knowledge of plumbing and electrical systems.
However, if you have any doubts as to your DIY capabilities, consult
a professional!
Planning an Omaha Sprinkler System
Planning is the key to a successful Omaha Sprinkler System Installation, so before you go mad with the shovel and dig up your entire lawn you need to lay out the lines for the sprinkler system using string and wooden stakes.
Once you are happy with the plan, the next stage is to dig the trenches
for the sprinkler pipes. If winters are cold in your area, you will need
to dig the trenches a little deeper to protect the pipes from frost. You
must also make sure the trenches are level.
Sprinkler Installation Details
Sections of pipe need to be joined together with tee sections inserted at intervals for the sprinkler heads. Control valves should be attached to the water supply section of pipe to route the water along the pipes. When the pipes have been laid in the trenches, install the sprinkler heads and make sure they are not too high.
Sprinkler Systems Plumbing
The final stage in an Omaha Sprinkler Systems installation process is to plumb the supply pipe into the water supply system. Make sure you include a stop and waste valve for emergency purposes. Wire in the control box to the electrical system and test the system. Once you are satisfied it is working correctly and everything is properly adjusted, fill in the trenches and re-test the system.
Conclusion
Finally, it should be clear that you CAN install your own sprinkler system,
but if you would rather have your sprinkler system professionally installed,
you can always contact an Omaha
Commercial Irrigation Company.